⚜ SteamCozy

Home / News / LAN Party

Patch 2026.10.01: Mega-Update Pt. 2

LAN Party · Community Announcements · October 09, 2026

Read the original on Steam ↗

Hi everyone!

We are so excited to finally get this update out. Thank you so much for your patience! This update is far and away our biggest yet and comes with several new features and a lot of fundamental improvements to the LAN Party experience.

There were a few core changes that made this update take a while, but from here on out we are expecting a much more frequent release cadence, most likely weekly. We also have several major announcements concerning new features and our official 1.0 release coming shortly!

IMPORTANT: Before I highlight some of the new features, I wanted to mention that we are working on our localization system and expect to start rolling out support for additional languages in the coming weeks. We've already finished all of the back end code/UI changes needed to support this, and we're planning to have a branch called "localization" that will have the new languages as we add them. Our plan is to do basic machine translations to start then have a professional translation service review them, but if anyone would like to help with language support it would be greatly appreciated!

Now, to highlight some of the new features:

Avatar Ragdolling

I feel like I've been working on this system for ages, so I can't begin to tell you how happy I am that this is finally hitting production. There has been a lot of fine-tuning required to get this working right, especially considering this needs to work with all avatars and assets someone could upload.

To enter ragdoll mode, simply click on the middle scroll wheel on your mouse. You can exit ragdoll mode by clicking it again or by hitting any of the movement keys.

One major fundamental change that came with this was completely uprooting our previous collider/hitbox system. Previously, all assets would be given a generic box collider by default, but players could configure assets with multiple colliders to make its hitbox more accurate. This system was inexact and tedious, and in an audit of our database we found that almost no player-made assets used custom colliders.

We decided to get rid of collider configuration in the asset importer entirely. Instead, each object will automatically have a collider added to it that matches its mesh exactly. We were able to maintain high performance by automatically simplifying the collider over a particular polygon count, saving colliders to local cache after generation, and using ultra simple colliders if the object is in motion. The new system is just as if not more performant than our previous system and leads to much more accurate interactions between assets and avatars.

Physics Objects & Throwing

To piggyback off the last feature, we're giving you the ability to designate assets in your room as "Physics Objects". This means that the asset will respond to gravity and have collisions with avatars and other assets.

Since you will most likely want to keep the majority of assets in your room static, this is turned OFF by default. If you want to make an asset a physics object, select it in decor mode and check the "Physics based" checkbox.

You can also set various physics properties for each asset, namely its friction coefficient, bounciness, and mass. These can be set regardless of if the asset is physics based or static. These physics properties can be set for walls, ceilings, and floors as well.

In addition, any asset that has been turned into a physics object can be picked up by pressing "E". You can press "E" again to drop it, or hold and release left click to throw it. Seats and screens can be made into physics objects as well, so you can pick up and throw a chair someone is sitting in or throw a TV someone is streaming to! If other players are ragdolling, you can pick them up and throw them too!

If several physics objects have moved and you want to reset all of their positions, press "P".

Assets that have been made physics based will remain static until an avatar or other asset touches them. We did this so physics objects on the wall or ceiling wouldn't just immediately fall to the ground.

Interior Walls

One of our most requested features has been the ability to create interior walls and multiple rooms within rooms. Its finally here!

To draw interior walls in your room, enter your room and go to blueprint mode. There is now a toggle on the bottom of the screen that toggles between drawing exterior and interior walls. Interior walls can be drawn anywhere in the room, whereas exterior walls need to complete a full loop.

Interior walls can be configured the same way as exterior walls, but each side of the wall can be configured independently. Also, you can cut into interior walls to create doorways and other openings between rooms. You can even put several different openings into the same wall.

Jukebox

We've implemented a "Jukebox" system in the room that allows you to stream any audio from your machine or browser to everyone else in the room. This is essentially our streaming system minus the visuals but with several adjustments to preserve audio quality and consistency. To start streaming audio to the room, just use the new Jukebox UI in the bottom right of the screen and pick an audio source to stream.

You can set the jukebox system to play flat 2D audio that plays at the same volume regardless of where you are in the room, or play 3D spatial audio that comes from invisible "Speakers" that you can place around your room in decor mode.

Note: The jukebox 3D asset in the GIF is not necessary for the jukebox system, I just put it there for fun.

Interactive Decor

Tired of basic room decor that just sits there and does nothing? No more!

We've implemented a new system that allows you to make standard decor assets interactable. In the asset importer, you can optionally set an activation trigger for the asset: interaction and proximity. For interaction, you trigger the asset by interacting with it the same way you would a seat or a screen. For proximity, it will be triggered when an avatar gets within a specified distance from it.

If a trigger has been set, the asset will now have an "inactive" and "active" state. The inactive state is how it is by default, and its active state is what it is once its trigger condition has been met. The inactive and active states can be configured completely independently, meaning you could make the assets size, lighting, and material different in the active state than it is in the inactive state.

In addition, you can apply custom animations and upload custom sound effects to either the active state or the transitions between the two states.

For example, in the GIF, I have both a lamp that plays a clicking sound effect and enables a light source when I interact with it, and I have a Big Mouth Billy Bass that plays an animation and sings when I get close enough to it.

Custom Humanoid Animations

Of everything we have implemented over the last couple of years, this was the toughest nut to crack. I've been experimenting for a very long time with how to load custom humanoid animations at runtime, but one of the major limitations of Unity's Mechanim system is that most necessary operations just aren't available at runtime. There was no way to import .anim files or extract animations from FBX files and create animations at runtime compatible with humanoid rigs.

However, with our new avatar import system, we found a way around this limitation. Without going too deep in the weeds, our new system allows us to isolate and extract an animation into a runtime-readable file that can then be imported and applied to a humanoid rig in subsequent sessions. Because of this, you can now bring in your own animations and use them on any humanoid avatar! We have a brand new Animation Importer, where you can import a model file with an embedded animation, configure the animation however you want (trim frames, speed up, lock position, etc.), and upload it! You can create animations for all action types, including movement, jumping, sitting, and emotes.

I've tested this with animations from my usual sources, so there might be some that don't translate properly. If an animation of yours doesn't import successfully, please let me know (LAN Party Discord) and I can help you out and hopefully make this system more robust.

I'm incredibly excited to see a ton of awesome animations on the marketplace!

Material Configuration & Avatar Editing

We've added the functionality for customizing the materials on any avatar or asset! You will now have a materials tab, where you can go through each material on the asset and change any of its sliders. In addition to several new presets for our default shader, we've made a brand new "Toon" slider to give materials a cell-shaded look, similar to how a lot of VRM avatars look.

In addition, you can now make personal edits to avatars, even ones you didn't upload! There is now an "Edit Avatar" button that will take you to a simplified version of the avatar importer. Here, you can change the avatar's height and materials. These changes are for you personally and don't affect the original avatar, but when you use the avatar other users will see the changes you've made.

Linux-Specific Build

We finally have a Linux build! One limitation of LAN Party with Linux+Photon or SteamOS was that streaming did not work for Linux users. However, in the new Linux build we have a new streaming protocol that allows Linux users to stream their display or even specific UI or screen segments to other users.

Note: Compatibility and streaming have primarily been tested with Wayland and SteamOS, so if you have a different setup we're very interested in hearing how things work for you.

Thank you so much for playing LAN Party! We're excited about some new features rolling out soon, so stay tuned!

-The LAN Party Team

Features:

Improvements:

Fixes:

LAN Party MORE ON STEAMCOZYLAN Party Price tracking · player charts · similar games →