ZusiSim.exe : 3.5.12.0
F Fixed animation errors
Ä Recursion depth count during route search no longer takes ETCS/LZB-Bk into account
N Turn maneuvers are only executed when the risk level is set to 0 or the driver's cab is deactivated
N Command functions expanded
Ä Expanded error messages if integrated ZD does not start
Ä Internal modifications to animations
Ä ETCS direction messages appear at the correct times
N Reversing in response to Rischa set to 0 or cab deactivated can be configured in the settings
Ä Time jump ends upon derailment
N Cruise control option: Operating the dynamic brake does not disable cruise control
N File transfer via TCP possible
N Digital command
F Door status corrected after turn
N New option to exclude signals from the recursion depth
F Default settings are loaded if the registry is incomplete
N Focus for keyboard and joysticks can be set separately
F Fixed empty command window
Ä Recursion depth is no longer incremented for selected signals and signals with only one starting route
F Fixed issues with command generation
F Fixed incorrect page display for Zp9
F Initial state for multiple drives now correct again
N Train operation without main air line now possible (for ET422-426/430)
N Test runs added for modern PZB90 variants (I60R CAN bus, EBICAB500/600, Trainguard Basic Indusi)
F Door release upon derailment now only on the platform side
F Door release after turnaround corrected
F Corrected “Close Doors” illuminated pushbutton in the “S-Bahn 423” door system
Ä SAT door system: Traction lock now optional
F Corrected camera viewpoint for “Train exterior view rear, F12”
F Auxiliary brake adjusted: Target pressure is limited to Cv pressure minus Fbv
F Conventional brake computer (without manager): Control of pneumatic brakes corrected
F PZB90: Exiting the start program is now possible even when stationary
ZusiSim.exe : 3.5.13.0
ZusiFtdEditor.exe : 3.5.12.0
F Keyboard assignments can now also be set to “none"
N Cruise control option: Dynamic brake operation does not disable cruise control
F Default settings are loaded if the registry is incomplete
N PZB90 AKN systems
Ä SAT door system: Traction lock now optional
ZusiFtdEditor.exe : 3.5.13.0 ZusiFzgEditor.exe : 3.5.12.0
F Default settings are loaded if the registry is incomplete
F Fixed issue where the window reopened during vehicle preview
N Train operation possible without main air line (for ET422-426/430)
ZusiFzgEditor.exe : 3.5.13.0 Zusi3DEditor.exe : 3.5.12.0
N Command functions expanded
Ä DEM handling improved
N Additional signal type: Sbk
N New option to exclude signals from the recursion depth
F The recursion depth option is now saved correctly
F Default settings are loaded if the registry is incomplete
N Default paths for template dialogs can be configured
N All operating points can be accessed directly via the navigation menu
N Signal optimization expanded
F Coupling signals in neighboring modules are referenced correctly even without a file name
Zusi3DEditor.exe : 3.5.13.0
ZusiFileManagement.exe : 3.5.12.0
Ä Adaptation to additional components
F Default settings are loaded if the registry is incomplete
ZusiFileManagement.exe : 3.5.13.0
z3strbie.exe : 3.5.12.0
Ä Full version
z3strbie.exe : 3.5.13.0
