A new update for ZUSI 3 has just been released!
Check the entire changelog below.
Changelog:
ZusiSim.exe : 3.5.11.0
N Timetable allows specifying changes to train characteristics
N Additional timetable entry types
Ä Preparation for National Values
F Route search in the assistant also finds the opposite track even when “main track” is specified (and vice versa) if no other route exists
N Additional start settings (parking brake, direction, desk activation) in the timetable editor
F TB0 now goes below 30 km/h again
F Starting under ETCS supervision now respects the display vMax
F Sound start state corrected
F Possible crash during timetable book creation fixed
N Initial state of shut-off valves, main switch, and fault switch are also respected when the option “Train data must be entered” is enabled
N Loading screen is dark when Dark Mode is selected in Windows
N Additional ETCS options for dependencies
F Horn behavior with PZB/LZB and direction switch corrected
N Preview version of battery-powered three-phase drive
N New function to open the last command in an external browser
N Option for mesh connection to improve performance
F AFB under LZB/ETCS when approaching a stop signal corrected
N Additional link functions in the intro file
N Placeholders (*) are now randomly replaced even for historical vehicle numbers
N New option to control indicators using blink logic
N ZD internal parameters for vehicles and driver’s desks
Ä Time acceleration is always disabled at the start of a run
N AKN-PZB90
ZusiSim.exe : 3.5.12.0
ZusiFtdEditor.exe : 3.5.11.0
N New option to control indicators using blink logic
N ZD internal parameters for vehicles and driver’s desks
N AKN-PZB90 ZusiFtdEditor.exe : 3.5.12.0
ZusiFzgEditor.exe : 3.5.11.0
F Opening files via double-click in Explorer also works in the 64-bit version
N Preview version of battery-powered three-phase drive
N ZD internal parameters for vehicles and driver’s desks ZusiFzgEditor.exe : 3.5.12.0
Zusi3DEditor.exe : 3.5.11.0
N In case of route errors, elements are listed with vMax -1 for the event “MBrh/vMax reduction P/R/G”
F Forest construction now occurs without offset at the base line
Ä New calculation approach for texture coordinates of ballast polygons
Ä Preparation for National Values
N Main-track signal analogous to opposite-track signal for French signals
F Transformation of signal coordinates when integrating into an existing signal corrected
F Intro window behavior
N Function to mark route elements by length/quantity/target element
N Forced brightness value can be edited in the material properties
Ä Longer file lists
F Double-click in file open dialogs no longer triggers selections
N Option for mesh connection to improve performance
N Copy and paste anchor coordinates in the frame window
N Option to disable the F2 shortcut Zusi3DEditor.exe : 3.5.12.0
ZusiDateiverwaltung.exe : 3.5.11.0
F Fixed: Determining texture settings could be faulty (link check)
N New ZIP options during file export ZusiDateiverwaltung.exe : 3.5.12.0
z3strbie.exe : 3.5.11.0
Ä Full version z3strbie.exe : 3.5.12.0
